2008 to 2014 Dodge Challenger Redline Side Stripes OEM Style Product Description.
The OEM style Redline stripes are stripes that start at the edge of the rear fascia and go to the front wheel well. The stripe is thick at the back and tapers down just before the door to a narrow stripe to its end at the wheel well. With a wide variety to choose from, these are sure to impress and make other Dodge Challenger owners jealous.
We use only the highest quality vinyl films, the standard films we use are manufactured by 3M, Avery Dennison, Orafol (Oracal), and Arlon. For cut vinyl vehicle graphics, 3M, Avery Dennison, Orafol, and Arlon all recommend High Performance Cast, 2 Mil Vinyl Films. If you doubt this, please feel free to investigate for yourself. Some installers and customers are requesting 3M 1080 Wrap material for the cut graphics that we produce. If requested we will supply this material for you, however, we advise against it. Wrap material is just that WRAP material, and the vinyl manufacturers themselves do not recommend 1080, or wrap material for cut vehicle graphics. There are many reasons for this, durability (Under 6 years), thickness (1080 is 4.5 Mil thick), etc.
This kit can be produced out of any of the materials we have listed on our color charts, we recommend Avery SuperCast 900 material for a high durability rating of 10-12 years in standard colors, or 3M 7125 Electrocut, 3M 180 Controltac, Orafol 751/951, and Arlon 2100. Obviously the durability is going to be affected by care, cleaning, weather conditions etc.
We do not, and will not use Calendered Films, as they are low durability, and are not designed for Vehicle Cut Graphics Applications. You may come across some of these on eBay etc. These are usually a cheaper product, 3M Series 50, Avery 700 Series and Lower etc., and will crack, fade, shrink, and will not last! However the choice is always yours!
Future 2008 to 2014 Dodge Challenger Redline Side Stripes OEM Style Designs.
The designs see currently listed here should be considered starting points, and to give you an initial idea of what can be accomplished. We are always open to new suggestions, mixing designs, or creating new designs to your specifications. We do not by an means expect everyone to like all, or even any of these designs, and we openly encourage your customizations with all of our products!
The general rule of thumb is, if you don't see it, we are happy to create it!
So the future for designs of this product is endless, and as we come up with new ideas, and receive new suggestions, designs will be added.
|Request a Custom Design