Graphics, Stripes, and Decals 2008 to 2014 Dodge Challenger.
The Dodge Challenger was originally produced back in 1958 and is now on the third generation that was introduced in 2008. Back in the first generation, the Challenger was listed as the “answer to the Mustang and Camaro” and some think the same of today’s model. This third generation model has design cues from that 1970 Dodge Challenger R/T.
Vehicle Specific, Custom Graphics for the 2008 to 2014 Dodge Challenger
These Graphics Kits will fit the following Vehicle Only
These Graphics Kits Fit Dodge Challenger Years
2008, 2009, 2010, 2011, 2012, 2013, 2014
These Graphics Will Fit Dodge Challenger Trim Levels
We use only the highest quality vinyl films, the standard films we use are manufactured by 3M, Avery Dennison, Orafol (Oracal), and Arlon. For cut vinyl vehicle graphics, 3M, Avery Dennison, Orafol, and Arlon all recommend High Performance Cast, 2 Mil Vinyl Films. If you doubt this, please feel free to investigate for yourself. Some installers and customers are requesting 3M 1080 Wrap material for the cut graphics that we produce. If requested we will supply this material for you, however, we advise against it. Wrap material is just that WRAP material, and the vinyl manufacturers themselves do not recommend 1080, or wrap material for cut vehicle graphics. There are many reasons for this, durability (Under 6 years), thickness (1080 is 4.5 Mil thick), etc.
These can be produced out of any of the materials we have listed on our color charts, we recommend Avery SuperCast 900 material for a high durability rating of 10-12 years in standard colors, also 3M 7125 Electrocut, 3M 180 Controltac, Orafol 751/951, and Arlon 2100. Obviously the durability is going to be affected by care, cleaning, weather conditions etc.
We do not, and will not use Calendered Films, as they are low durability, and are not designed for Vehicle Cut Graphics Applications. You may come across some of these on eBay etc. These are usually a cheaper product, 3M Series 50, Avery 700 Series and Lower etc., and will crack, fade, shrink, and will not last! However the choice is always yours!
Submit Gallery Picture(s)
Future 2008 to 2014 Dodge Challenger Designs.
The designs see currently listed here should be considered starting points, and to give you an initial idea of what can be accomplished. We are always open to new suggestions, mixing designs, or creating new designs to your specifications. We do not by an means expect everyone to like all, or even any of these designs, and we openly encourage your customizations with all of our products!
The general rule of thumb is, if you don't see it, we are happy to create it!
So the future for designs of this product is endless, and as we come up with new ideas, and receive new suggestions, designs will be added.
Request a Custom Design
This vinyl graphic accent/stripe is specifically designed to fit the edge surface section of the rear spoiler on the 2008-2014 Dodge Challenger. This decal will add varying depth, and contrast to the rear spoiler depending on the stripe style you choose to install.
From $59.48 Each
Part Number: DDG-CHLG814-RSEBO
This vinyl graphic accent/stripe is specifically designed to fit the main/front surface section of the rear spoiler on the 2008 to 2014 Dodge Challenger. This decal will add varying depth, and contrast to the rear spoiler depending on the stripe style you choose to install.
From $95.22 Each
Part Number: DDG-CHLG814-RSSBO
These Simulated Side Window Louvers for the Rear Quarter Side Windows on the 2015 to Present Dodge Challenger. These graphics are designed to give the 3D appearance and visual effect of a window louver. We have a full range of colors available for these easy to install graphics.
From $48.20 Inc. Driver & Passenger Side
Part Number: DDG-CHLG814-RSWL
What better way to add a distinct look to your 2008-2014 Dodge Challenger, than with these 2016 Blacktop style Rally Stripes. We have taken the original OEM design and added to it to make them available for the 2008 to 2014 models, as well as making them available in huge selection of colors and materials. These fully custom nose to tail kits are unlike any other kits out there, we custom fit our sets to follow the contours and curves of your car. These kits will fit all 2008-2014 models of the Challenger.
From $267.70 Nose to Trunk
Part Number: DDG-CHLG814-BT16RS
The yellow jacket style stripes are reminiscent of the stripes that were painted on the 1970 Dodge Challengers and will give your modern Challenger that retro look. These stripes are placed along the mid-line of the car and are a narrow stripe.
From $163.98 Per Set
Part Number: DDG-CHLG814-YJBS
These '15 Scat Pack Bumblebee OEM Style Tail Stripes are exactly the same dimensions as the OEM appearance package kit usually seen on the 2015 Dodge Challenger, we have somply now made it available of all model years! Starting at the bottom of each rear quarter panel, up and over the trunk, and the same down the other side. These stripes can be left solid or you can choose from our variety of designs for your Dodge Challenger. Custom Text and Logos can be added to the stripes
From $138.84 Per Set
Part Number: DDG-CHLG814-SB15TS
What better car to add Redline style single rallye stripes to than the 2008 to 2014 Dodge Challenger. This powerful muscle car has a lot under the hood to show off, why not give it a one of a kind look to show off as well. These fully custom bumper to bumper kits are unlike any other kits out there, we custom fit our sets to follow the contours and curves of your car. These kits will fit all 2008 to 2014 models of the Challenger. Designed to be exactly the same stripes widths as OEM, so you can add front and rear bumper sections to your OEM kit! We even pre-cut for the license plate light on the rear bumper!
From $239.58 Bumper to Bumper
Part Number: DDG-CHLG814-RLRS
These full length hockey pinstripes are a combination rear quarter hockey stick stripe, and upper body pinstripe graphic for 2008 to 2014 Dodge Challenger. These stripes will give your modern Challenger that great Heritage look. These stripes are placed along the very upper body line of the car and are a narrow stripe, with a hockey stick rear quarter finish. Custom Texts, and Logos can be added for that persnalized custom stripe addition for your '08-'14 Challenger!
From $146.16 Per Set
Part Number: DDG-CHLG814-FLHP
The upper beltline accent pinstripes are very similar to the 2015 OEM SXT Side Stripes on Dodge Challengers and will give your modern Challenger that great OEM look. These stripes are placed along the mid-line of the car and are a narrow stripe.
From $131.12 Per Set
Part Number: DDG-CHLG814-UBPS
The side accent hash stripes are combination of a slim upper body stripe, and a fender hash stripe. This combination war stripe will improve the look of your Dodge Challenger!
From $163.62 Per Set
Part Number: DDG-CHLG814-SAHS
Give your modern Dodge Challenger some 70's "R/T" inspiration with these Full Length Upper Body / Hood to Fender Hash Combination Stripes. Numerous "Starting Point" styles to choose from. These Stripes start with a Hood to Fender Hash stripe, continuing along the upper body section through to the rear quarters.
From $194.00 Per Set
Part Number: DDG-CHLG814-UBHS
These Retro full length AAR Cuda Style body stripes are a nod to the past giving your newer Dodge Challenger that retro look. This stripe style while modern pays homage to the original AAR Cuda!
From $191.89 Per Set
Part Number: DDG-CHLG814-AAR
These 2015 R/T Classic Style Stripes are perfect if you want that 2015 look regardless of your Dodge Challenger model year! Or, if you want the stripe completely customized for a more individual look that nobody else has yet achieved.
Whatever the reason, this stripe will give your Challenger a sharp, modern, customized look.
From $174.28 Per Set
Part Number: DDG-CHLG814-RT15CS
The Dodge Challenger rallye stripe kit is a full bumper to bumper kit that will transform your Challenger into one of a kind car that you desire it to be. Our custom fit kit follows every contour and curve of the Challenger to ensure a perfect fit every time. We have a wide variety of designs and customizable styles for you to choose from as well as a huge selection of colors so that your Challenger will be a show stopper!
From $295.30 Bumper to Bumper
Part Number: DDG-CHLG814-RDSK
The Trans-Am Style side stripe kit is a new addition to our wide variety of Challenger graphics. With the Dodge style hash marks in the center of this full length kit, these rare stripes are sure to turn heads.
From $266.41 Per Set
Part Number: DDG-CHLG814-TASS
Rocker Panel Stripes are designed to run along the bottom of the door, and fenders. These are designed to fit the 2008 to 2014 Dodge Challenger perfectly. They are pre-cut for the door, and fenders, making installation uneventful.
From $78.69 Per Set
Part Number: DDG-CHLG814-RPS
The hood of the Dodge Challenger has the perfect section for an accent stripe that goes from the intake towards the nose of the car. This section of the hood has a scallop that creates a perfect fit for this accent stripe. With a variety of designs, you are sure to find the excellent addition to your Challenger.
From $40.99 Per Set
Part Number: DDG-CHLG814-HIAS
The rear bumblebee style tail stripes wrap around from the bottom of the rear quarter panels, around the side marker lights, up and over the trunk, and the same down the other side. These stripes can be left solid or you can choose from our variety of designs for your Dodge Challenger.
From $157.23 Per Set
Part Number: DDG-CHLG814-BBTS
The rear quarter stinger hockey stripes are stripes that adhere merely to the rear quarter. They follow the curvature of the upper line of the rear fender and flow to the rear of the car where they extend down towards the side marker light in a hockey stick shape.
From $145.85 Per Set
Part Number: DDG-CHLG814-RQHS
The rear billboard side stripes are a massive statement for your Challenger. These decals cover the entire rear lower quarter of the car as well as part of the door. The options are endless with this decal as far as how you can customize it. Send us your ideas and we would be happy to help you make this the ultimate customization.
From $244.99 Per Set
Part Number: DDG-CHLG814-RBBS
The reverse “C” stripes go from just below the rear window to the back of the Challenger then down around the side marker light and forward where it tapers off in the middle of the door. This sporty custom look will turn heads whether you are racing down the freeway or just sitting in traffic on your way to work.
From $152.29 Per Set
Part Number: DDG-CHLG814-RCRS
The Mopar 14 Style stripes start at the front of the car and trek along the car along the mid-line and raise slightly just below the rear window. Then at the rear of the Dodge Challenger it widens out where it proceeds across the trunk and meets up perfectly with the other side.
From $265.64 Per Set
Part Number: DDG-CHLG814-MP14
The Extended style Redline stripes were inspired by the Redline model of the Dodge Challenger. These narrow at the front and widen just below the rear window and go the full length of the Dodge Challenger. This stripe includes the rear fascia section and the nose section to go the entire length of the car from nose to tail.
From $164.39 Per Set
Part Number: DDG-CHLG814-RLEX
The OEM style Redline stripes are stripes that start at the edge of the rear fascia and go to the front wheel well. The stripe is thick at the back and tapers down just before the door to a narrow stripe to its end at the wheel well. With a wide variety to choose from, these are sure to impress and make other Dodge Challenger owners jealous.
From $143.99 Per Set
Part Number: DDG-CHLG814-RLOE
The Mopar 10 style stripes are reminiscent of the stripes that were painted on the 1970 Dodge Challengers and will give your modern Challenger that retro look. These stripes are placed along the mid-line of the car and are a narrow stripe.
From $163.98 Per Set
Part Number: DDG-CHLG814-MP10
The drag pack “splatter” style stripes are a large side decal that is placed on the rear side of the Challenger. The splatter/tire track design can be fully customized with the text and/or logo of your choice and will show off all the true qualities of your Dodge Challenger.
From $383.37 Per Set
Part Number: DDG-CHLG814-DPSS
Create your own custom callout decal that shows off whatever you want to about your Dodge Challenger. Some examples are the size or type of your engine, your horsepower, or the model of your car. You can also come up with something else completely custom and we will design it for you!
From $25.24 Inc. Driver & Passenger Side
Part Number: DDG-CHLG814-FFCO
Rear quarter stinger stripes are a stripe that features the upper lines of the rear quarter panel. This is a subtle yet classy stripe that will add a customized look to your Dodge Challenger.
From $91.16 Per Set
Part Number: DDG-CHLG814-RQSS
C-Pillar Stripes are placed to cover the entire C-pillar and follows over the windows to the front of the car. This decal can give your Challenger a two-tone effect and can be made in any of the color choices that we have to offer.
From $80.96 Per Set
Part Number: DDG-CHLG814-CPST
The rear partial upper stripes begin at the very back of the Challenger and fill the body line section perfectly just past the side mirror. With a wide variety of styles and colors, they can be personalized to make your Challenger completely unique.
From $162.02 Per Set
Part Number: DDG-CHLG814-UBRP
The full length upper slim body stripes are a slimmer version of the upper body stripe but is still the full length of the car. This showy stripe will increase the adventurous side of your Dodge Challenger!
From $177.57 Per Set
Part Number: DDG-CHLG814-FSUS
The full length upper body stripe is a wide stripe that follows the upper silhouette of the Challenger just below the windows and is the full length of the car. There are places that this stripe can include personalized text for your unique look.
From $202.14 Per Set
Part Number: DDG-CHLG814-FWUS
The RT Classic retro style stripes are nostalgic of the 1971 Dodge Challenger RT. These decals start at the headlamps and lineup with the rear passenger window line. With a wide collection of choices of styles, this stripe is sure to impress.
From $161.30 Per Set
Part Number: DDG-CHLG814-RTCS
The front upper body partial accent stripes start at the front of the car and go through the middle of the door. There is a huge variety of designs that you can choose from to make these stripes specialized for you.
From $131.02 Per Set
Part Number: DDG-CHLG814-UBFP
The rear spoiler blackout decal blacks out the entire back section of the rear spoiler. This decal will add an obscurity to the back of your car that will add to the already impressive taillights section.
From $37.70 Each
Part Number: DDG-CHLG814-RSBO
The rear bumper accent decals are decals that sit in the indention that is right above the license plate. These accents will feature your license plate and draw attention to that one of a kind plate that you may have or will just add an extra accent to your Challenger.
From $28.33 Per Set
Part Number: DDG-CHLG814-RBA
The rear fascia blackout decals blackout the remaining section of the rear taillight section of your Challenger. These blackouts have a perfect fit and will complete the blackout look that Dodge started with their blackened section around the taillights.
From $58.30 Each
Part Number: DDG-CHLG814-RFBO
On the rear bumper of the Challenger, there is a section that is a perfect place for text. We can customize your logo, the name of your car, or whatever else you would like to put here and in many different styles and colors.
From $33.68 Each
Part Number: DDG-CHLG814-RBTX
The hood to fender hash stripes are OEM Style decals. These decals start at the edge of the hood and go to the contour line on the fender. These decals will add the sporty look to your Challenger that will give it the unique look that the Challenger pulls off so well.
From $90.95 Per Set
Part Number: DDG-CHLG814-HFHS
The front bumper of the Challenger has a perfect spot for your custom text. Do you have your own company and want to display your website? Have you named your car and you want to display it? This is the perfect place for it. The text can also be mirrored so that it can be read in the rear view mirror by the person in front of you!
From $33.68 Each
Part Number: DDG-CHLG814-FBTX
Want to make the front end of your Dodge Challenger look lean and mean? These front fascia blackout decals will fit perfectly around the lights and front grille to black out the entire section.
From $58.30 Each
Part Number: DDG-CHLG814-FFBO
The T-Hood decals cover the front center of the nose of the Challenger, then go back towards the windshield and branch out to a T shape on the raised section of the hood behind the hood intake vents. There is a wide variety of styles to choose from for this 1970’s stylistic decal.